Overview Similar Products –> Product Description Throttle Cable Gunnar Gasser to VM33, VM34, VM36, VM38 Round slide and TM non pump Mikuni Carbs M32288, MVM38-9, M32280 This Mikuni throttle cable is for use with Mikuni VM carbs ranging from 30mm up to 38mm & all TM non pump Mikuni carburetors 36mm thru to 41mm. This throttle cable set comes with a top fitting and inner wire protrusion for coupling with our Gasser/Whirlpull side pull Quick Action Throttle assemblies. The exposed inner wire length is matched for use in Mikuni VM carbs using keyhole type cable attachment to the throttle valve. If your motorcycle has an OEM VM carb version, fitted with a cable holder that is screwed to the slide, this cables use is restricted to carb sizes of 36mm and larger. These premium grade cables use a Nylon lined outer housing. The Nylon liner inside the outer cable housing conduit is for reduced friction and heat resistance. The cable must be lubricated during installation with cable lube or a very light oil such as 3 in 1 to avoid clogging. Besides the need to lubricate the inner wire in the housing, the cable end barrels at their pivot points should be lubricated with water proof grease. If you need to clean your cable which is particularly relevant for dirt bikes. We recommend using WD40 or a very light oil such as 3 in 1. This effectively washes away dirt from the cable, without clogging it . Product Videos Custom Field Product Reviews