Burly Brand 13 – inch Handlebar Installation Kit

Product Number:B30-1102
Finish: Stainless

• Complete cable/line installation kit for Burly 13 in. Apehangers installed on ABS faired baggers.
• Includes everything you’ll need to install your handlebars:
• Extended stainless steel braided steel brake line
• Extended stainless steel clutch cable
• All necessary wiring

Note: Some ABS models use stock brake line.

Fits:
Harley-Davidson
(2009-2013) Electra Glide Classic – FLHTC
(2008) Electra Glide Classic (EFI) – FLHTC
(2009) Electra Glide Standard – FLHT
(2008) Electra Glide Standard (EFI) – FLHT
(2009-2013) Electra Glide Ultra Classic – FLHTCU
(2008) Electra Glide Ultra Classic (EFI) – FLHTCU
(2010-2013) Electra Glide Ultra Limited – FLHTK
(2009-2013) Street Glide – FLHX
(2008) Street Glide (EFI) – FLHX

Includes:
1 – 63 in. brake line with (2) 15 degree 3/8 in./10mm banjo fittings
2 – 10mm-1.00 banjo bolts
10- 3/8 in./10mm crush washers
1 – 53 in. brake line with (1) 15 degree 3/8 in./10mm banjo fitting and (1) 60 degree 3/8 in.-24 male inverted flare fitting
2 – 22 in. brake line with (1) 70 degree 3/8 in./10mm banjo fitting and (1) 90 degree 3/8 in.-24 male inverted flare fitting each
1 – Junction block with drilled mounting hole and (3) female 3n fittings
1 – P-clamp
1 – White plastic barrel
26- 14 1/2 in. wires with male and female spade connectors
2 – 14 in. shrink tubing
26- 2 1/2 in. shrink tubing
1 – Paper clip
1 – 70 in. clutch cable with up to 3 1/4 in. travel
Instructions

Items Included

Fitments